Figure 105. Front USB and video cables connection
Removing and replacing server components
This section provides information for removing and replacing components in the server.
Removing and replacing structural parts
Replacement of structural parts is your responsibility. If Lenovo installs a structural part at your request,
you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
Removing the cover
Use this information to remove the cover.
To remove the server cover, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 31.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
.
Chapter 6
Removing and replacing components
189