Replacing The System Battery - Lenovo System x3550 M4 Installation And Service Manual

Figure 188. System battery removal
a. If there is a rubber cover on the battery holder, use your fingers to lift the battery cover from
the battery connector.
b. Use one finger to tilt the battery horizontally out of its socket, pushing it away from the socket.
Attention: Neither tilt nor push the battery by using excessive force.
Figure 189. System battery removal
c. Use your thumb and index finger to lift the battery from the socket.
Attention: Do not lift the battery by using excessive force. Failing to remove the battery
properly may damage the socket on the system board. Any damage to the socket may require
replacing the system board.
Step 6. Dispose of the battery as required by local ordinances or regulations. See the Environmental
Notices and User's Guide on the Documentation CD for more information.

Replacing the system battery

Use this information to replace the system battery.
The following notes describe information that you must consider when replacing the system battery in
the server.
• When replacing the system battery, you must replace it with a lithium battery of the same type from
the same manufacturer.
.
Chapter 6 Removing and replacing components
271