Lenovo System x3550 M4 Installation And Service Manual page 205

Figure 107. Cover installation
Step 6. Slide the server all the way into the rack until it latches.
Step 7. Reconnect the external cables and power cords.
Removing the air baffle
Use this information to remove the air baffle.
To remove the air baffle, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 31.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables
(see "Turning off the server" on page 21).
Step 3. Remove the cover (see "Removing the cover" on page 189).
Step 4. Grasp the air baffle, disengage pins from pin holes; then, lift the air baffle up.
Figure 108. Air baffle removal
.
Chapter 6 Removing and replacing components
191