Cabling Operator Information Panel - Lenovo System x3550 M4 Installation And Service Manual

Figure 103. DVD drive cable connection

Cabling operator information panel

The internal routing and connectors for the operator information panel.
The following notes describe additional information you must consider when you install or remove the
operator information panel cable:
• To remove the operator information panel cable, slightly press the cable toward the fan cage; then, pull to
remove the cable from the connector on the system board. Pulling the cable out of the connector by
excessive force might cause damage to the cable or connector.
• To connect the operator information panel cable on the system board, press evenly on the cable. Pressing
on one side of the cable might cause damage to the cable or connector.
.
Chapter 6 Removing and replacing components
187