Lenovo System x3550 M4 Installation And Service Manual page 70

Hide thumbs Also See for System x3550 M4:

Table of Contents

Align the SAS/SATA adapter so that the keys align correctly with the connector on the system board.

Insert the SAS/SATA adapter in the dedicated connector on the system board or PCI riser-card

Attention: Incomplete insertion might cause damage to the server or the adapter.

Insert the SAS/SATA adapter into the RAID connector on the system board until it is firmly

seated. The retention brackets secure the SAS/SATA adapter in place when the adapter is

firmly seated into the connector.

Note: Remove the PCI bracket that come with ServeRAID H1110, ServeRAID M1115, or

ServeRAID M5110 SAS/SATA adapter before installing a SAS/SATA adapter in the dedicated

connector on the system board.

Figure 41. ServeRAID adapter installation

Insert the SAS/SATA adapter into the PCI riser cards (see "Replacing an adapter" on page 226).

System x3550 M4 Installation and Service Guide

Troubleshooting