Drive Ids - Lenovo System x3550 M4 Installation And Service Manual

• The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays
and PCI and PCI Express slots covered or occupied. When you install a drive, PCI, or PCI Express
adapter, save the EMC shield and filler panel from the bay or PCI adapter or PCI Express adapter slot
cover in the event that you later remove the device.

Drive IDs

The drive ID that is assigned to each drive is printed on the front of the server. The following illustrations
show the locations of the IDs of the drives. The ID numbers and the drive bay numbers are the same.
2.5-inch hot-swap hard disk drive IDs
The hot-swap-drive ID that is assigned to each drive is printed on the front of the server.
The following illustration shows the location of the IDs of the hard disk drives. The ID numbers and the
drive bay numbers are the same.
Figure 22. 2.5-inch hot-swap hard disk drive IDs
3.5-inch hot-swap hard disk drive IDs
The hot-swap-drive ID that is assigned to each drive is printed on the front of the server.
The following illustration shows the location of the IDs of the hard disk drives. The ID numbers and the
drive bay numbers are the same.
Figure 23. 3.5-inch hot-swap hard disk drive IDs
36
System x3550 M4 Installation and Service Guide