Advanced Routing - TP-Link TL-WR843N User Manual

Chapter 4
Done!

4. 12. Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
4. 12. 1. Static Routing List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced Routing
¾ To add static routing entries:
1. Click Add New.
2. Enter the following
3 ) Leave the status as
6. Select
Enable Internet Access Control
Control function.
7. Select Allow the packets specified by any enabled access
control policy to pass through the Router
policy and click Save.
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
> Static Routing.
information.
Configure the Router in WISP Client Router Mode
Enabled as click Save.
to enable Access
as the default filter
52