TP-Link TL-WR843N User Manual page 26

Chapter 4
• User Name/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• WAN Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
• Connect Automatically
when it is down.
• Time-based Connecting
from the start time to the end time (both are in HH:MM format).
• Connect Manually
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
1. Only when you have configured the system time on the
Connecting function take effect.
2. Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
- Enter the user name and password provided by your ISP. These
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the Internet connection can be terminated
- The connection can be re-established automatically
- The connection will only be established in the period
- You can click
Configure the Router in WISP Client Router Mode
or Static IP to activate the secondary
Connect/Disconnect
Max Idle Time
System Tools > Time Settings
Max Idle Time
to connect/disconnect
function as Connect
page, will the Time-based
Max Idle Time because some
23