TP-Link TL-WR843N User Manual page 78

Chapter 5
• IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
• Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
• Default Gateway - Enter the gateway IP address in dotted-decimal notation provided
by your ISP.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Primary/Secondary DNS
decimal notation provided by your ISP.
PPPoE/Russia PPPoE
If your ISP provides a PPPoE connection, select
• User Name/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
- (Optional) Enter one or two DNS addresses in dotted-
- Enter the username and password provided by your ISP. These
- Enter the password provided by your ISP again to ensure the
Configure the Router in Standard Wireless Router Mode
PPPoE/Russia PPPoE.
75