Advanced Routing; Static Route List - TP-Link Archer C55 User Manual

4.15 Advanced Routing

There are two submenus under the Advanced Routing menu: Static Route List and System
Routing Table. Click any of them, and you will be able to configure the corresponding function.
4.15.1

Static Route List

Choose menu "Advanced Routing → Static Route List", and then you can configure the static
route in the next screen (shown in the following figure). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
To add static route entries:
1. Click Add New shown in
2. Enter the following data:
Destination IP Address - The Destination IP Address is the address of the network or

host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the

network portion, and which portion is the host portion.
Archer C55 AC1200 Wireless Dual Band Gigabit Router
, you will see the following screen.
the figure above
- 87 -