Chapter 4
•
Disable Security
- The wireless security function can be enabled or disabled. If
disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
•
WPA-PSK/WPA2-Personal
shared passphrase.
•
Version
- Select Automatic,
•
Encryption
- Select Automatic,
•
Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
•
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
•
WPA /WPA2-Enterprise
•
Version
- Select Automatic,
•
Encryption
- Select Automatic,
•
Radius Server IP
•
Radius Port
- Enter the port that Radius server used.
•
Radius Password
•
Group Key Update Period
The value should be 30 or above. Enter 0 to disable the update.
•
WEP
- It is based on the IEEE 802.11 standard.
- It's the WPA/WPA2 authentication type based on pre-
WPA-PSK
or WPA2-PSK.
TKIP
or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- It's based on Radius Server.
WPA
or WPA2.
TKIP
or AES.
- Enter the IP address of the Radius server.
- Enter the password for the Radius server.
- Specify the group key update interval in seconds.
Configure the Router in WISP Client Router Mode
31