TP-Link TL-WR843N User Manual page 7

Chapter 1
LED
(LAN)
(WAN)
(WPS)
Port and Button Description
Item
ON/OFF
POWER
INTERNET
LAN (1-4)
Operation Mode
Switch
WPS/RESET
Status
On A device is connected to the corresponding LAN port.
Off No device is connected to the corresponding LAN port.
Green The router is connected to the Internet.
The INTERNET port is connected, but there is no Internet
Orange
connection.
Off The INTERNET port is not connected.
Slow blinking WPS connection is in progress.
WPS connection is successful. The LED will go off in 5
On
minutes.
Quick blinking WPS connection fails.
To turn on or off the router, press the ON/OFF button.
Connect the router to the provided power adapter.
Connect a DSL/cable modem to the INTERNET port.
Connect an Ethernet-enabled device to the local network.
Toggle to select the router's operation mode between ROUTER and WISP. You can also
set the mode via the router's web interface, after which the operation mode switch
will be disabled.
To establish WPS connection, press the WPS/RESET button.
To restore the router to its factory defaults, press and hold the WPS/RESET button for
more than 5 seconds.
Get to Know About Your Router
Indication
Description
4