TP-Link TL-WR843N User Manual page 103

Chapter 5
For example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select Only the PCs listed can browse the built-in web pages to perform
Administrator
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the built-in web pages to
perform administrator tasks.
3 ) Click Add, and your PC's MAC address will also be listed.
4 ) Click Save.
Note:
If your PC is blocked but you want to access the router again, press and hold the
the factory defaults.
5. 9. 4. Remote Management
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Security >
remote device via the Internet.
tasks.
Remote Management, and you can manage your router from a
Configure the Router in Standard Wireless Router Mode
Reset button to reset the router to
100