TP-Link TL-WR843N User Manual page 66

Chapter 4
4. 16. 4. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
default values.
• The default Username: admin
• The default Password: admin
• The default IP
• The default Subnet
4. 16. 5. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
¾ To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A ".bin" file of
the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click Choose File
and click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
> Factory Defaults. Click
Address: 192.168.0.1
Mask: 255.255.255.0
> Backup & Restore.
to locate the backup configuration file stored in your computer,
Configure the Router in WISP Client Router Mode
Restore to reset all settings to the
63