TP-Link TL-WR843N User Manual page 126

Chapter 5
¾ To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A ".bin" file of
the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click Choose File
and click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
5. 17. 6. Reboot
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
5. 17. 7. Password
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
and password of the router.
to locate the backup configuration file stored in your computer,
> Reboot, and you can restart your router.
> Password, and you can change the factory default username
Configure the Router in Standard Wireless Router Mode
123