TP-Link TL-WR843N User Manual page 27

Chapter 4
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
• Service Name/AC Name
should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
• ISP Specified IP Address
router, please select
by your ISP in dotted-decimal notation.
• Detect Online Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Primary DNS/Secondary DNS
to the router, please select
dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS server
address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select
• User Name/Password
fields are case-sensitive.
• Auth Server - Enter the authenticating server IP address or host name.
• Auth Domain - Type in the domain suffix server name based on your location.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
• Connection Mode
- The service name and AC (Access Concentrator) name
- If your ISP does not automatically assign IP addresses to the
Use IP address specified by ISP
- The router will detect Access Concentrator online at every
- If your ISP does not automatically assign DNS addresses
Use the following DNS servers
- Enter the username and password provided by your ISP. These
Configure the Router in WISP Client Router Mode
and enter the IP address provided
and enter the IP address in
BigPond Cable.
24