TP-Link TL-WR843N User Manual page 10

Chapter 2
Note:
If you need to use a longer Ethernet cable (not exceeding 100 meters) , TP-LINK's 48V PoE adapters such as TL-
POE200, TL-POE150S and TL-POE10R are recommended.
Standard Wireless Router Mode
Create an instant private wireless network and share Internet to multiple Wi-Fi devices.
This mode is suitable for hotel rooms and home networks.
Internet
Modem
1. Turn off the modem, and remove the backup battery if it has one.
2. Connect the modem to the INTERNET port on the router via an Ethernet cable and
press the ON/OFF
3. Turn on the modem and wait for it to restart.
4. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router's label.
Repeater Mode
Repeat signal from an existing wireless network. This mode is suitable to extend
wireless coverage, reaching devices that were previously too far from your primary
AP to maintain a stable wireless connection. The repeated signal will display the same
network name and password as those of your existing wireless network.
Passive PoE Injector
up to 30 meters
ON/OFF
button on the router.
WPS/
ON/OFF POWER INTERNET 1 2 3 4 ROUTER WISP RESET
WPS/
POWER INTERNET 1 2 3 4 ROUTER WISP RESET
LAN (1/2/3/4)
Connect the Hardware
or
or
7