TP-Link TL-WR843N User Manual page 96

Chapter 5
Done!
5. 8. 2. Port Triggering
Port triggering can specify a triggering port and its corresponding external ports.
When a host in the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the IP
Personal Website
LAN
Home
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to
Forwarding
4. Click
Add New. Select
Port list. The service port, internal port and protocol will be
automatically filled with contents. Enter the PC's IP address
192.168.0.100 in the
5. Leave the status as
Note:
• It is recommended to keep the default settings of
you are not clear about which port and protocol to use.
• If the service you want to use is not in the
the corresponding parameters manually. You should verify the port number that
the service needs.
• You can add multiple virtual server rules if you want to provide several services in
a router. Please note that the
Users in the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
If you have changed the default
Port to visit the website.
Configure the Router in Standard Wireless Router Mode
Router
WAN: 218.18.232.154
> Virtual Servers.
HTTP from the
IP Address field.
Enabled and click Save.
Common Service Port
Service Port should not be overlapped.
http:// WAN IP
Service Port, you should use
Common Service
Internal Port and Protocol if
list, you can enter
(in this example:
http:// WAN IP: Service
93