TP-Link TL-WR843N User Manual page 125

Chapter 5
3. Go to System Tools
4. Click Browse to locate the downloaded firmware file, and click Upgrade.
5. 17. 4. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
default values.
• The default Username: admin
• The default Password: admin
• The default IP
• The default Subnet
5. 17. 5. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
> Firmware Upgrade.
> Factory Defaults. Click
Address: 192.168.0.1
Mask: 255.255.255.0
> Backup & Restore.
Configure the Router in Standard Wireless Router Mode
Restore to reset all settings to the
122