Advanced Routing; Static Route List - TP-Link TL-WR841N User Manual

Chapter 4
Done!

4. 11. Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.

4. 11. 1. Static Route List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced Routing
¾ To add static routing entries:
1. Click Add New.
2. Enter the following
• Destination IP Address
or host that you want to assign to a static route.
7. Select Allow the packets specified by any enabled access
control policy to pass through the Router
policy and click Save.
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
> Static Route
information.
- The Destination Network is the address of the network
Configure the Router in Wireless Router Mode
List.
as the default filter
51