TP-Link TL-WR843N User Manual page 22

Chapter 4
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the button of the new device in two minutes
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select Enter the new device's
filed and click Connect.
Enabled and click Add
Enabled and click Add
PIN, enter your client device's current PIN in the
Configure the Router in WISP Client Router Mode
Device.
and click Connect.
Device.
PIN
19