Working Mode; Network - TP-Link TL-WR843N User Manual

Chapter 6
• Channel - The current wireless channel in use.
• Mode - The current wireless working mode in use.
• Channel Width
• MAC Address
• Repeater Status
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes) - Traffic in bytes sent out from the WAN port.
• Sent (Packets)
• System Up Time - The length of the time since the router was last powered on or reset.
Click Refresh to get the latest status and settings of the router.
6. 2.

Working Mode

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Working Mode.
3. Select the working mode as needed and click Save.
Note: When
Control the system mode by software
disabled. If you want to enable it, please log into the web management page and go to
Control the system mode by
6. 3.

Network

6. 3. 1. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
- The current wireless channel width in use.
- The physical address of the router.
- The status of the router working as a repeater.
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in packets sent out from the WAN port.
is checked, the operation mode switch on the router will be
software.
Configure the Router in Repeater Mode
Working Mode to uncheck
131