TP-Link TL-WR843N User Manual page 67

Chapter 4
4. 16. 6. Reboot
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
4. 16. 7. Password
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
and password of the router.
It is strongly recommended that you change the default username and password of
the router, for all users that try to access the router's web-based utility or Quick Setup
will be prompted for the router's username and password.
Note:
> Reboot, and you can restart your router.
> Password, and you can change the factory default username
Configure the Router in WISP Client Router Mode
64