TP-Link TL-WR843N User Manual page 117

Chapter 5
3. Select the WAN Connection Type
• SLAAC - Connections which use RADVD IPv6 address assignment.
• DHCPv6 - Connections which use dynamic IPv6 address assignment.
• Static IPv6 - Connections which use static IPv6 address assignment.
• PPPoEv6 - Connections which use PPPoEV6 that requires a username and
password.
• Tunnel 6to4 - Connections which use 6to4 address assignment.
SLAAC
• IPv6 Address
• Default Gateway
provided by your ISP.
• Connect - Click
• Disconnect -
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
notation provided by your ISP.
• Secondary IPv6 DNS
hexadecimal notation provided by your ISP.
• Use the following IPv6 DNS Servers
addresses, select
IPv6 DNS and
Note:
If you get "Address not found error" when you access a web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
according to your ISP network topology:
- The IPv6 address assigned by your ISP dynamically.
- Displays the default gateway in colon-hexadecimal notation
Connect to connect to the IPv6 server of your ISP.
Click Disconnect to disconnect from the IPv6 server of your ISP.
- Displays the DNS IPv6 address in colon-hexadecimal
- Displays another DNS IPv6 address in colon-
Use the following IPv6 DNS Servers
Secondary IPv6 DNS
Configure the Router in Standard Wireless Router Mode
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
- If your ISP gives you one or two DNS IPv6
and enter the
in the corresponding fields.
Automatically, and the
Primary
114