TP-Link TL-WR843N User Manual page 48

Chapter 4
into the gateway to support address and port translation for certain application layer
"control/data" protocols such as FTP, TFTP, H323 etc.
• FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep the
default Enable.
• TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable.
• H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default
• RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
• SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable.
3. Click Save.
4. 9. 2. Advanced Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Security >
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
Enable.
Advanced Security, and you can protect the router from being
Configure the Router in WISP Client Router Mode
45