TP-Link TL-WR843N User Manual page 84

Chapter 5
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
the router. If the MAC address is required, you can click
MAC address will be filled in the
Note:
1. You can only use the MAC Address Clone function for PCs on the LAN.
2. If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
5. 4. 3. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• IP Address - Enter the IP address in dotted-decimal notation of your router (factory
default - 192.168.0.1).
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
• IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allow you to
watch TV on IPTV-supported devices in the LAN .
Note:
1. If you have changed the IP address, you must use the new IP address to login.
2. If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP Server will
be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is managing
WAN MAC Address
Configure the Router in Standard Wireless Router Mode
to restore the MAC address of WAN
Clone MAC Address
field.
and this
81