Ip&Mac Binding - TP-Link TL-WR843N User Manual

Chapter 5
2. Go to Bandwidth Control
Control rules.
• Description - This is the information about the rules such as address range.
• Egress Bandwidth - This field displays the max and min upload bandwidth through
the WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Enable - This field displays the status of the rule.
• Modify - Click Modify/Delete
¾ To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information like the figure shown below.
3. Click Save.
5. 14. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
> Rules List, and you can view and configure the Bandwidth
- This field displays the max and min download bandwidth through
to edit/delete the rule.
Configure the Router in Standard Wireless Router Mode
108