Advanced Routing - TP-Link TL-MR3420 User Manual

Chapter 4
Done!
4. 9.

Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to a specific destination.
4. 9. 1. Static Routing List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
¾ To add static routing entries:
1. Click Add New, and enter the following
from the target drop-down list; select
the schedule drop-down list.
3 ) Leave the status as
6. Select Enable Internet Access Control
Control function.
7. Select Allow the packets specified by any enabled access
control policy to pass through the Router
policy and click Save.
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
Advanced Routing >
Enabled and click Save.
Static Routing.
information.
Configure the Router
schedule_1 from
to enable Access
as the default filter
65