TP-Link TL-WR843N User Manual page 153

2. Enable DMZ: Go to
DMZ Host IP Address
3. Enable H323 ALG: Go to
Now you can enjoy your net meeting normally.
Q6. What can I do if my wireless signal is unstable or weak?
It may be caused by too much interference.
• Set your wireless channel to a different one.
• Choose a location with less obstacles that may block the signal between the router
and the host AP. An open corridor or a spacious location is ideal.
• Move the router to a new location away from Bluetooth devices and other household
electronics, such as cordless phone, microwave, and baby monitor, etc., to minimize
signal interference.
• When in Repeater mode, the ideal location to place the router is halfway between
your host AP and the Wi-Fi dead zone. If that is not possible, place the router closer to
your host AP to ensure stable performance.
Forwarding > DMZ. Select
field, and then Click Save.
Security > Basic
Enable and enter your IP address in the
Security, enable H323 ALG and click Save.
150