TP-Link TL-WR843N User Manual page 30

Chapter 4
• User Name/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Connect/Disconnect
• Dynamic IP/ Static IP
please enter the IP address, subnet mask, gateway and DNS also provided by your ISP.
• Internet IP Address/ Internet DNS
assigned by L2TP server.
• Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
• Connect Automatically
when it is down.
• Connect Manually
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
- Enter the user name and password provided by your ISP. These
- Enter the Password provided by your ISP again to ensure the
- Click this button to connect or disconnect immediately.
- Select either as required by your ISP. If
- The Internet IP address and DNS server address
- In this mode, the Internet connection can be terminated
- The connection can be re-established automatically
- You can click
Configure the Router in WISP Client Router Mode
Connect/Disconnect
Max Idle Time
Static IP is selected,
Max Idle Time
to connect/disconnect
function as Connect
27