TP-Link TL-WR843N User Manual page 136

Chapter 6
• Wireless Name of Root AP
• MAC Address of Root AP
• Mode - Select the desired mode. It is strongly recommended that you keep the default
setting 11bgn mixed, so that all of 802.11b/g/n wireless stations can connect to the
router.
Note:
If 11bg mixed mode is selected, the
be changed.
• Channel Width - Select any channel width from the drop-down list. The default setting
is Auto, which can automatically adjust the channel width for your clients.
• WDS Mode -This field determines which WDS Mode will be used. It is not necessary
to change the WDS mode unless you notice network communication problems
with root AP. If you select Auto, then router will choose the appropriate WDS mode
automatically.
• Enable Wireless Router Radio
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
• Survey - Click this button, and the
Point you want to connect to, and click
network's SSID and MAC address will be automatically filled into the corresponding
box.
- The SSID of AP that you want to connect to.
- The MAC address of AP that you want to connect to.
Channel Width field will turn grey and the value will become 20M, and cannot
- The wireless radio of the router can be enabled or
AP List page will appear. Find the SSID of the Access
Connect
Configure the Router in Repeater Mode
in the corresponding row. The target
133