Working Mode - TP-Link TL-WR843N User Manual

Chapter 4
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
4. 3.

Working Mode

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Working Mode.
3. Select the working mode as needed and click Save.
Note: When
Control the system mode by software
disabled. If you want to enable it, please log into the web management page and go to
Control the system mode by
Enabled and get the
is checked, the operation mode switch on the router will be
software.
Configure the Router in WISP Client Router Mode
Current PIN of the router.
Working Mode to uncheck
20