TP-Link TL-WR843N User Manual page 92

Chapter 5
• Allow Guest To Access My Local Network
can also access the local network.
• Enable Guest Network Bandwidth Control
Control rules will take effect.
• Egress Bandwidth For Guest Network
for the guest network.
• Ingress Bandwidth For Guest Network
port for the guest network.
• Guest Network - Check to enable
• Network Name - Enter a string of up to 32 characters. It is strongly recommended that
you change your network name (SSID). This value is case-sensitive. For example, TEST
is NOT the same as test.
• Wireless Security - The wireless security function can be enabled or disabled. If disabled,
wireless clients can connect to the router's guest network without a password. It's
strongly recommended to
If WPA/WPA2 - Personal is selected:
• Version - Select Automatic,
• Encryption - Select Automatic,
• PSK Password - Enter ASCII or Hexadecimal characters. For Hexadecimal, the length
should be between 8 and 64 characters; for ASCII, the length should be between 8
and 63 characters.
• Group Key Update Period
value can be 0 or at least 30. Enter 0 to disable the update.
• Access Time - During this period, devices on the guest network can access the router.
Configure the Router in Standard Wireless Router Mode
- If enabled, clients on the guest network
- If enabled, the Guest Network Bandwidth
- The upload speed through the INTERNET port
- The download speed through the INTERNET
Guest Network.
choose WPA/WPA2 - Personal
WPA-PSK or WPA2-PSK.
TKIP or AES.
- Specify the group key update interval in seconds. The
as the security type.
89