TP-Link TL-WR843N User Manual page 77

Chapter 5
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP. Click
parameters.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Use These DNS Servers
These DNS Servers
DNS servers will be assigned dynamically from your ISP.
• Host Name - This option specifies the name of the router.
• Get IP with Unicast DHCP
applications. If you cannot get the IP address normally, you can choose this option. (It
is rarely required.)
Static IP
If your ISP provides a static or fixed IP address, subnet mask, default gateway and DNS
setting, please select
- If your ISP provides you one or two DNS addresses, select
and enter the primary and secondary addresses. Otherwise, the
- A few ISPs' DHCP servers do not support the broadcast
Static IP.
Configure the Router in Standard Wireless Router Mode
Dynamic IP, and the router will
Release to release the IP
Use
74