Working Mode; Network - TP-Link TL-WR810N User Manual
300mbps wi-fi pocket router/ap/tv adapter/repeater
Hide thumbs
Also See for TL-WR810N:
- User manual (292 pages) ,
- Quick start manual (2 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
Chapter 4
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
4. 3.
Working Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Working
Mode.
3. Select the working mode as needed and click Save.
4. 4.
Network
4. 4. 1.
WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Network
> WAN.
3. Configure the IP parameters of the LAN and click Save.
Enabled
and get the
Configure the Router in Standard Wireless Router Mode
Current PIN
of the router.
19
Advertisement
Table of Contents
