Working Mode; Network; Lte Dial Up - TP-Link TL-MR6400 User Manual

2) The WPS function cannot be configured if the wireless function of the router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.

4.5 Working Mode

Standard Wireless Router - In this mode, this device will only use LAN/WAN port to

access Internet. The inner hosts can access Internet via 3 LAN ports or wireless.
3G/4G Router - In this mode, this device enables multiusers to share Internet via 3G/4G

modem. The LAN/WAN port acts the same as a LAN port while at 3G/4G Router mode.
Be sure to click the Save button to save your settings on this page.

Note:
The router will reboot automatically after you click the Save button.

4.6 Network

Figure 4-6 the Network menu
There are four submenus under the Network menu (shown in Figure 4-6): LTE Dial Up, LTE
Data Settings, PIN Management and LAN. Click any of them, and you will be able to configure
the corresponding function.

4.6.1 LTE Dial Up

Choose menu "Network → LTE Dial Up", You can configure dial-up settings on this page.
TL-MR6400
Figure 4-5 Working Mode
-24-
300Mbps Wireless N 4G LTE Router