Working Mode - TP-Link TL-WR710N User Manual

Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.

4.5 Working Mode

The Router supports five operation mode types: Wireless Router, Access Point, Repeater,
Client and Wireless Client Router. Please select one you want. Click Save to save your choice,
which is shown as Figure 4-7.
Wireless Router - The wireless Router Mode. In this mode, the device enables multi-user to
share Internet via DSL/Cable Modem. The only wired port works as WAN.
Access Point - The wireless access point mode.
Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
Client - The Client Mode. The computer connected by Ethernet could get access to an AP by
Client mode.
WISP Client Router - In this mode, the device enables multiple users to share Internet
connection from WISP.
TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 4-6
Figure 4-7 Wireless Working Mode Settings
- 36 -