TP-Link TL-SL5428E Reference Manual page 77

Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the LACP system priority as 1024 globally:
VN/UN764:G*eqphki+%ncer"u{uvgo/rtkqtkv{ 1024
ncer"rqtv/rtkqtkv{"
Fguetkrvkqp"
The"ncer"rqtv/rtkqtkv{"command is used to configure the LACP system priority
globally. To return to the default configurations, please use" pq" ncer"
rqtv/rtkqtkv{ command.
U{pvcz"
ncer"rqtv/rtkqtkv{ pri
pq"ncer"rqtv/rtkqtkv{
Rctcogvgt"
pri —— The port priority, ranging from 0 to 65535. It is 32768 by default.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)
Gzcorng"
Configure the LACP port priority as 1024 for Fast Ethernet port 1:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/1
VN/UN764:G*eqphki/kh+%ncer"rqtv/rtkqtkv{ 1024
ujqy"gvjgtejcppgn"
Fguetkrvkqp"
The" ujqy" gvjgtejcppgn" command is used to display the EtherChannel
information.
U{pvcz"
ujqy"gvjgtejcppgn"[channel-group-num ] { detail | summary }"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
60