TP-Link TL-SL5428E Reference Manual page 218

urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
Fguetkrvkqp"
The urcppkpi/vtgg" ouv" eqphkiwtcvkqp command is used to access MST
Configuration Mode from Global Configuration Mode, as to configure the
VLAN-Instance mapping, region name and revision level. To return to the
default configuration of the corresponding Instance, please use pq"
urcppkpi/vtgg"ouv"eqphkiwtcvkqp command.
U{pvcz"
urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
pq"urcppkpi/vtgg"ouv"eqphkiwtcvkqp
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Enter into the MST Configuration Mode:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%
kpuvcpeg"
Fguetkrvkqp"
The kpuvcpeg command is used to configure the VLAN-Instance mapping. To
remove the VLAN-instance mapping or disable the corresponding instance,
please use pq"kpuvcpeg command. When an instance is disabled, the related
mapping VLANs will be removed.
U{pvcz"
kpuvcpeg"instance-id"xncp"vlan-id
pq"kpuvcpeg"instance-id"[xncp"vlan-id]
Rctcogvgtu"
instance-id —— Instance ID, ranging from 1 to 8.
vlan-id — — The VLAN ID selected to mapping with the corresponding
instance.
Eqoocpf"Oqfg"
MST Configuration Mode"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
201