TP-Link TL-SL5428E Reference Manual page 275

Gzcorng"
Specify the source address which sends the Query message as fe80::1234 on
VLAN 2:
VN/UN764:G*eqphki+%" krx8" onf" upqqrkpi" swgtkgt" xncp" 2" swgt{/uqwteg
fe80::1234"
krx8"onf"upqqrkpi"hknvgt*inqdcn+"
Fguetkrvkqp"
The" krx8" onf" upqqrkpi" hknvgt command is used to configure the multicast
group filter entries in the format of ip-range. To disable the filter entry, please
use pq"krx8"onf"upqqrkpi"hknvgt command.
U{pvcz"
krx8"onf"upqqrkpi"hknvgt"filter-id"start-ipv6"end-ipv6"
pq"krx8"onf"upqqrkpi"hknvgt"filter-id"
Rctcogvgt"
filter-id —— Specify the filter ID, ranging from 1 to 30.
start-ipv6 —— Start IPv6 multicast address of the filter entry.
end-ipv6 —— End IPv6 multicast address of the filter entry.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Create filter entry with filter ID as 2, start IP as ff80::1234 and end IP as
ff80::1235:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"hknvgt 2 ff80::1234 ff80::1235"
krx8"onf"upqqrkpi"hknvgt*kpvgthceg+"
Fguetkrvkqp"
The"krx8"onf"upqqrkpi"hknvgt command is used to enable the filter function on
the interface. To disable the filter function, please use pq"krx8"onf"upqqrkpi"
hknvgt command.
U{pvcz"
krx8"onf"upqqrkpi"hknvgt"
pq"krx8"onf"upqqrkpi"hknvgt"
Eqoocpf"Oqfg"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
258