TP-Link TL-SL5428E Reference Manual page 133

Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the maximum number of the connections to the SSH server as 3:
VN/UN764:G*eqphki+%kr"uuj"ocz/enkgpv"3
kr"uuj"fqypnqcf"
Fguetkrvkqp"
The" kr" uuj" fqypnqcf" command is used to download the SSH key file from
TFTP server.
U{pvcz"
kr"uuj"fqypnqcf"{v1 | v2 } key-file kr/cfftguu"ip-addr
Rctcogvgt"
v1 | v2 —— Select the type of SSH key to download, v1 represents SSH-1, v2
represents SSH-2.
key-file —— The name of the key-file which is selected to download. The
length of the name ranges from 1 to 25 characters. The key length of the
downloaded file must be in the range of 256 to 3072 bits.
ip-addr —— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Download an SSH-1 type key file named ssh-key from TFTP server with the IP
address 192.168.0.148:
VN/UN764:G*eqphki+%kr"uuj"fqypnqcf"v1 ssh-key"kr/cfftguu"192.168.0.148
Download an SSH-1 type key file named ssh-key from TFTP server with the IP
address fe80::1234:
VN/UN764:G*eqphki+%"kr"uuj"fqypnqcf"v1 ssh-key"kr/cfftguu"fe80::1234
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
116