TP-Link TL-SL5428E Reference Manual page 315

Gzcorng"
Enable NDP and NTDP function for Fast Ethernet port 5:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/5"
VN/UN764:G*eqphki/kh+%enwuvgt"pfr"enable"pvfr"enable
enwuvgt"kr"rqqn"
Fguetkrvkqp"
The enwuvgt"kr"rqqn"command is used to create a new cluster. If no specified
cluster name is set through enwuvgt"eqoocpfgt command, the newly created
cluster will enjoy the system default name "tplink-cluster".
U{pvcz"
enwuvgt"kr"rqqn ip mask"
Rctcogvgt"
ip —— The cluster IP address pool.
mask —— The cluster IP address mask.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Create a cluster and configure its IP address pool as 192.168.10.1 –
192.168.0.254:
VN/UN764:G*eqphki+%enwuvgt"kr"rqqn"192.168.10.1 255.255.255.0"
enwuvgt"eqoocpfgt"
Fguetkrvkqp"
The enwuvgt" eqoocpfgt command is used to specify the cluster name, and
you can only specify the cluster name when you create the cluster. To delete a
cluster, please use pq"enwuvgt"eqoocpfgt"command.
U{pvcz"
enwuvgt"eqoocpfgt"name"
pq"enwuvgt"eqoocpfgt
Rctcogvgt"
name —— The cluster name, ranging from 1 to 16 characters.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
298