TP-Link TL-SL5428E Reference Manual page 316

Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the newly created cluster name as tp:
VN/UN764:G*eqphki+%enwuvgt"eqoocpfgt"tp"
enwuvgt"ocpcig"
Fguetkrvkqp"
The enwuvgt"ocpcig command is used to configure the hold time and interval to
send handshake packets of the cluster. To return to the default configuration,
please use pq"enwuvgt"ocpcig"command.
U{pvcz"
enwuvgt"ocpcig"[ jqnfvkog hold-time | vkogt interval-time ]"
pq"enwuvgt"ocpcig"[ jqnfvkog | vkogt ]"
Rctcogvgt"
hold-time —— Hold Time, which is the time for the switch to keep the cluster
information. Hold Time ranges from 1 to 255 in seconds. It is 20 by default.
interval-time — — Interval Time, which is the interval to send handshake
packets. Interval Time ranges from 1 to 255 in seconds. It is 20 by default.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the Hold Time and Interval Time of the cluster as 50 seconds:
VN/UN764:G*eqphki+%enwuvgt"ocpcig"jqnfvkog 50"
VN/UN764:G*eqphki+%enwuvgt"ocpcig"vkogt"50"
enwuvgt"ogodgt"
Fguetkrvkqp"
The enwuvgt" ogodgt command is used to add member switch. To delete the
corresponding member, please use pq" enwuvgt" ogodgt command. The
add/delete operations of member switches should be implemented by the
commander switch according to the MAC address.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
299