TP-Link TL-SL5428E Reference Manual page 222

U{pvcz"
urcppkpi/vtgg"rtkqtkv{"pri
pq"urcppkpi/vtgg"rtkqtkv{"
Rctcogvgt"
pri —— Bridge priority, ranging from 0 to 61440. It is 32768 by default.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Configure the bridge priority as 4096:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"rtkqtkv{"4096
urcppkpi/vtgg"ve/fghgpf"
Fguetkrvkqp"
The urcppkpi/vtgg"ve/fghgpf command is used to configure the TC Protect of
Spanning Tree globally. To return to the default configuration, please use pq"
urcppkpi/vtgg" ve/fghgpf command. A switch removes MAC address entries
upon receiving TC-BPDUs. If a malicious user continuously sends TC-BPDUs to
a switch, the switch will be busy with removing MAC address entries, which may
decrease the performance and stability of the network.
U{pvcz"
urcppkpi/vtgg"ve/fghgpf vjtgujqnf threshold rgtkqf"period
pq"urcppkpi/vtgg"ve/fghgpf"
Rctcogvgt"
threshold —— TC Threshold, ranging from 1 to 100 packets. By default, it is 20.
TC Threshold is the maximum number of the TC-BPDUs received by the switch
in a TC Protect Cycle.
period —— TC Protect Cycle, ranging from 1 to 10 in seconds. By default, it is
5.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure TC Threshold as 30 packets and TC Protect Cycle as 10 seconds:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ve/fghgpf"vjtgujqnf 30 rgtkqf 10"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
205