TP-Link TL-SL5428E Reference Manual page 277

Rctcogvgt"
filter-list —— Specify the filter id list, in format of 1,3,10.
Eqoocpf"Oqfg"
Interface Configuration Mode
Gzcorng"
Specify the filter id as 1 and 10 on interface gigabitEthernet 1/0/2:
VN/UN764:G*eqphki+%"kpvgthceg"ikicdkvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%"krx8"onf"upqqrkpi"hknvgt/kf"1,10"
krx8"onf"upqqrkpi"ocz/itqwr"
Fguetkrvkqp"
The" krx8" onf" upqqrkpi" ocz/itqwr command is used to specify the limit
number of groups for a port to join in. The default value is 256. To restore the
default value, please use pq"krx8"onf"upqqrkpi"ocz/itqwr command.
U{pvcz"
krx8"onf"upqqrkpi"ocz/itqwr"limit"
pq"krx8"onf"upqqrkpi"ocz/itqwr"
Rctcogvgt"
limit —— Specify the max number of multicast groups on a port, ranging from 0
to 256.
Eqoocpf"Oqfg"
Interface Configuration Mode
Gzcorng"
Specify the limit group as 128 on interface gigabitEthernet 1/0/2:
VN/UN764:G*eqphki+%"kpvgthceg"ikicdkvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%"krx8"onf"upqqrkpi"ocz/itqwr"128"
engct"krx8"onf"upqqrkpi"uvcvkuvkeu"
Fguetkrvkqp"
The engct"krx8"onf"upqqrkpi"uvcvkuvkeu command is used to clear the statistics
of the MLD packets.
U{pvcz"
engct"krx8"onf"upqqrkpi"uvcvkuvkeu
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
260