TP-Link TL-SL5428E Reference Manual page 182

U{pvcz"
squ"equ
pq"squ"equ
Eqoocpf"Oqfg"
Global Configuration Mode
Wugt"Iwkfgnkpgu"
IEEE 802.1P gives the Pri field in IEEE 802.1Q tag a recommended definition.
When the mapping relation between IEEE 802.1P Priority and TC egress queue
is enabled, the data will be classified into the egress queue based on this
mapping relation.
Gzcorng"
Enable the mapping relation between IEEE 802.1P Priority and egress queue:"
VN/UN764:G*eqphki+%squ"equ
squ"fuer"
Fguetkrvkqp"
The squ"fuer command is used to enable the mapping relation between DSCP
Priority and TC egress queue. To disable the mapping relation, please use pq"
squ"fuer command.
U{pvcz"
squ"fuer
pq"squ"fuer
Eqoocpf"Oqfg"
Global Configuration Mode
Wugt"Iwkfgnkpgu"
DSCP (DiffServ Code Point) is a new definition to IP ToS field given by IEEE.
DSCP priorities are mapped to the corresponding 802.1p priorities. IP datagram
will be classified into the egress queue based on the mapping relation between
DSCP priority and TC egress queue.
Gzcorng"
Enable the mapping relation between DSCP Priority and egress queue:"
VN/UN764:G*eqphki+%squ"fuer
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
165