TP-Link TL-SL5428E Reference Manual page 155

eqr{"uvctvwr/eqphki"vhvr"
Fguetkrvkqp"
The eqr{"uvctvwr/eqphki"vhvr"command is used to backup the configuration file
to TFTP server.
U{pvcz"
eqr{"uvctvwr/eqphki"vhvr kr/cfftguu " ip-addr hkngpcog"name
Rctcogvgt"
ip-addr —— IP address of the TFTP server. Both IPv4 and IPv6 addresses are
supported, for example 192.168.0.1 or fe80::1234.
name — — Specify the name for the configuration file which would be
backuped.
Eqoocpf"Oqfg"
Privileged EXEC Mode
Gzcorng"
Backup the configuration files to TFTP server with the IP 192.168.0.148 and
name this file config:
VN/UN764:G% eqr{" uvctvwr/eqphki" vhvr" kr/cfftguu 192.168.0.148 hkngpcog
config"
Backup the configuration files to TFTP server with the IP fe80::1234 and name
this file config:
VN/UN764:G% eqr{"uvctvwr/eqphki"vhvr" kr/cfftguu fe80::1234 hkngpcog config"
eqr{"vhvr"uvctvwr/eqphki"
Fguetkrvkqp"
The eqr{"vhvr"uvctvwr/eqphki"command is used to download the configuration
file to the switch from TFTP server.
U{pvcz"
eqr{"vhvr"uvctvwr/eqphki"kr/cfftguu " ip-addr hkngpcog"name
Rctcogvgt"
ip-addr —— IP address of the TFTP server. Both IPv4 and IPv6 addresses are
supported, for example 192.168.0.1 or fe80::1234.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
138