TP-Link TL-SL5428E Reference Manual page 306

is, the transmit interval will be shorten to a second, and several LLDPDUs will
be sent out (the number of LLDPDUs equals this parameter). The value ranges
from 1 to 10 and the default value is 3.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the Transmit Interval of LLDPDU as 45 seconds and Trap message to
NMS as 120 seconds:
VN/UN764:G*eqphki+%nnfr"vkogt"vz/kpvgtxcn"45
VN/UN764:G*eqphki+%nnfr"vkogt"pqvkh{/kpvgtxcn"120"
nnfr"tgegkxg"
Fguetkrvkqp"
The nnfr" tgegkxg" command is used to enable the designated port to receive
LLDPDU. To disable the function, please use pq"nnfr tgegkxg"command.
U{pvcz"
nnfr"tgegkxg"
pq"nnfr"tgegkxg"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable Fast Ethernet port 1 to receive LLDPDU:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%nnfr"tgegkxg"
nnfr"vtcpuokv"
Fguetkrvkqp"
The nnfr"vtcpuokv"command is used to enable the designated port to transmit
LLDPDU. To disable the function, please use pq"nnfr vtcpuokv"command.
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
289