TP-Link TL-SL5428E Reference Manual page 257

kr"kior"upqqrkpi"swgtkgt"xncp"*igpgtcn"swgt{+"
Fguetkrvkqp"
The kr" kior" upqqrkpi" swgtkgt" xncp command is used to configure the
parameters for IGMP Snooping Querier to send a general query frame. To
return to the default configuration, please use pq" kr" kior" upqqrkpi" swgtkgt"
xncp"command.
U{pvcz"
kr" kior" upqqrkpi" swgtkgt" xncp" vlan-list" {swgt{/kpvgtxcn" interval |"
ocz/tgurqpug/vkog response-time | igpgtcn/swgt{"uqwteg/kr"ip-addr }
pq" kr" kior" upqqrkpi" swgtkgt" xncp" vlan-list" {swgt{/kpvgtxcn" |"
ocz/tgurqpug/vkog | igpgtcn/swgt{" " uqwteg/kr}
Rctcogvgt"
vlan-list—— VLAN ID list, ranging from 1 to 4094, in the format of 1-3, 5. It is
multi-optional.
interval—— The time interval to send a general query frame by IGMP Snooping
Querier, ranging from 1 to 300 (Seconds). By default, it is 60 seconds.
response-time—— The maximal time for the host to respond to a general query
frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds.
ip-addr—— The source IP of the general query frame sent by IGMP Snooping
Querier. It should not be a multicast IP or a broadcast IP. By default, it is
192.168.0.1.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
For VLAN 2, specify its query-interval as 200 seconds, and the response-time
as 20 seconds:
VN/UN764:G*eqphki+%kr"kior"upqqrkpi"swgtkgt"xncp"2 swgt{/kpvgtxcn 200
VN/UN764:G*eqphki+%kr"kior"upqqrkpi"swgtkgt"xncp"2 ocz/tgurqpug/vkog
20"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
240