TP-Link TL-SL5428E Reference Manual page 141

influence of the aging time and can only be deleted manually too. However, the
learned entries will be saved even the switch is rebooted.
status —— Enable or disable the Port Security function for a specified port. By
default, this function is disabled.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable Port Security function for Fast Ethernet port 1, select Static mode as the
learn mode, and specify the maximum number of MAC addresses that can be
learned on this port as 30:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%oce"cfftguu/vcdng"ocz/oce/eqwpv ocz/pwodgt"30
oqfg"static uvcvwu enable"
ujqy"oce"cfftguu/vcdng"
Fguetkrvkqp"
The"ujqy"oce"cfftguu/vcdng"command is used to display the information of all
address entries.
U{pvcz"
ujqy"oce"cfftguu/vcdng {dynamic | static | drop | all }
Rctcogvgt"
dynamic | static | drop | all —— The type of your desired entry.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of all address entries:
VN/UN764:G*eqphki+%ujqy"oce"cfftguu/vcdng"all"
VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
124